08537

SSD OCZ - 2,5'' - 60GB - SATA3

SOLID STATE DISK 2.5" 60GB SATA3 OCZ AGILITY3 AGT3-25SAT3-60G

READ:525MB/S
WRITE:475MB/S

GENERALE
Brand OCZ
Series Agility 3
Model AGT3-25SAT3-60G
Device Type Internal Solid State Drive (SSD)
Used For Consumer

CARATTERISTICHE FISICHE
Form Factor 2.5"
Capacity 60GB
Memory Components MLC
Interface SATA III
Width 3.93"
Depth 2.74"
Height 0.37"
Weight 0.17 lbs.

PERFORMANCE
Sustained Sequential Read up to 525 MB/s (SATA 6Gbps)
up to 280 MB/s (SATA 3Gbps)
Sustained Sequential Write up to 475 MB/s (SATA 6Gbps)
up to 260 MB/s (SATA 3Gbps)
MTBF 2,000,000 hours Features

CARATTERISTICHE
Max Read:
up to 525 MB/s (SATA 6Gbps)
up to 280 MB/s (SATA 3Gbps)

Max Write:
up to 475 MB/s (SATA 6Gbps)
up to 260 MB/s (SATA 3Gbps)

4KB Random Read: 10,000 IOPS (40 MB/s)
4KB Random Write: 50,000 IOPS (195 MB/s)
Maximum 4KB Random Write: 80,000 IOPS (310 MB/s)

Sequential Read AS-SSD: 180 MB/s
Sequential Write AS-SSD: 65 MB/s

4K Random Read AS-SSD: 12,500 IOPS (50 MB/s)
4K Random Write AS-SSD: 17,500 IOPS (70 MB/s)

TRIM (requires OSsupport)

ECC Recovery: Up to 55 bits correctable per 512-byte sector (BCH)

Support Self-Monitoring, Analysis and ReportingTechnology (S.M.A.R.T.)

Fully compliant with Serial ATA InternationalOrganization: Serial ATA Revision 3.0.Fully compliant with ATA/ATAPI-8StandardNative Command Queuing (NCQ)

NOTE
1. Maximum Sequential Speeds are determined using ATTO
2. Small file I/O performance is measured using Iometer2008, Queue Depth 32, 4KB Aligned; Logical Block Address (LBA) range: 85%of total drive capacity
3. Small file I/O performance is measured using Iometer2008, Queue Depth 32, 4KB Aligned; Logical Block Address (LBA) range: 8GBIncompressible data performance is measured using AS-SSD; 64 thread for 4K specs
4. Full performance achieved with a native SATA 6Gbps controller